0
0
- Home
- Product Categories
- GCGC.MS Accessories
GCGC.MS Accessories
Product Listing
-
Product PartDescription:
For adding a moisture filter to the carrier line
LOW STOCKFor adding a moisture filter to the carrier line
-
Product PartDescription:
Syringe Volume PTFE Tipped Plunger Needle Length (mm) Needle Gauge Needle OD (mm) Needle Tip Needle ID (mm) P/N Replacement Plunger P/N Replacement Needle P/N 5 μL − 42 23 0.63 Cone 0.11 221-75173 221-75173-01 - 10 μL √ 42 23 0.63 Cone 0.11 221-74469 - - 10 μL − 42 23 0.63 Cone 0.11 221-34618 - - 10 μL √ 42 23 0.63 Cone 0.11 221-75174 221-75174-02 221-75174-01 50 μL − 42 23 0.63 Cone 0.11 221-45243 - - 250 μL √ 42 23 0.63 Cone 0.11 221-45244 221-45244-01 -
IN STOCKSyringe Volume PTFE Tipped Plunger Needle Length (mm) Needle Gauge Needle OD (mm) Needle Tip Needle ID (mm) P/N Replacement Plunger P/N Replacement Needle P/N 5 μL − 42 23 0.63 Cone 0.11 221-75173 221-75173-01 - 10 μL √ 42 23 0.63 Cone 0.11 221-74469 - - 10 μL − 42 23 0.63 Cone 0.11 221-34618 - - 10 μL √ 42 23 0.63 Cone 0.11 221-75174 221-75174-02 221-75174-01 50 μL − 42 23 0.63 Cone 0.11 221-45243 - - 250 μL √ 42 23 0.63 Cone 0.11 221-45244 221-45244-01 -
-
Product PartDescription:
AOC-20i Syringe, 10ul Fixed Needle, Tapered for On Column injections with OCI-2010
IN STOCKAOC-20i Syringe, 10ul Fixed Needle, Tapered for On Column injections with OCI-2010
-
OUT OF STOCKSplit only, ID 3.4mm, OD 4.8mm, Length 99mm
-
-
Product PartDescription:
Press-Tight™ Connector (5 pcs) This connector is used to connect capillary columns easily by inserting the columns into the connector from both ends. When the columns are coated with polyimide resin, the connection will remain tight almost permanently and will be completely free of leakage. Applicable to 0.35 mm to 0.8 mmOD capillary columns. This product is usable up to the maximum temperature of your columns—not to exceed 350 °C. Main usage: Connection of broken capillary columns The connectors are unobtrusive. On-column sample injection Any capillary columns can be used in on-column injection mode by connecting a short wide-bore capillary columns to the inlet of the column Retention gap method An about 2 meters long capillary tube with no stationary phase, which is connected to the head of analytical capillary column, prevents peaks from being split Column conditioning A short capillary tube, which is connected to the outlet of the column, prevents air (oxygen) from diffusing into the column, thus preventing the deterioration of liquid phase which is kept at a high temperature Stable storing of capillary columns Deterioration by air and contamination can be prevented by connecting the both ends with a capillary tube.
OUT OF STOCKPress-Tight™ Connector (5 pcs) This connector is used to connect capillary columns easily by inserting the columns into the connector from both ends. When the columns are coated with polyimide resin, the connection will remain tight almost permanently and will be completely free of leakage. Applicable to 0.35 mm to 0.8 mmOD capillary columns. This product is usable up to the maximum temperature of your columns—not to exceed 350 °C. Main usage: Connection of broken capillary columns The connectors are unobtrusive. On-column sample injection Any capillary columns can be used in on-column injection mode by connecting a short wide-bore capillary columns to the inlet of the column Retention gap method An about 2 meters long capillary tube with no stationary phase, which is connected to the head of analytical capillary column, prevents peaks from being split Column conditioning A short capillary tube, which is connected to the outlet of the column, prevents air (oxygen) from diffusing into the column, thus preventing the deterioration of liquid phase which is kept at a high temperature Stable storing of capillary columns Deterioration by air and contamination can be prevented by connecting the both ends with a capillary tube.
-
Product PartDescription:
Press-Tight™ Connector (5 pcs with 5 g polyimide resin) This connector is used to connect capillary columns easily by inserting the columns into the connector from both ends. When the columns are coated with polyimide resin, the connection will remain tight almost permanently and will be completely free of leakage. Applicable to 0.35 mm to 0.8 mmOD capillary columns. This product is usable up to the maximum temperature of your columns—not to exceed 350 °C. Main usage: Connection of broken capillary columns The connectors are unobtrusive. On-column sample injection Any capillary columns can be used in on-column injection mode by connecting a short wide-bore capillary columns to the inlet of the column Retention gap method An about 2 meters long capillary tube with no stationary phase, which is connected to the head of analytical capillary column, prevents peaks from being split Column conditioning A short capillary tube, which is connected to the outlet of the column, prevents air (oxygen) from diffusing into the column, thus preventing the deterioration of liquid phase which is kept at a high temperature Stable storing of capillary columns Deterioration by air and contamination can be prevented by connecting the both ends with a capillary tube.
LOW STOCKPress-Tight™ Connector (5 pcs with 5 g polyimide resin) This connector is used to connect capillary columns easily by inserting the columns into the connector from both ends. When the columns are coated with polyimide resin, the connection will remain tight almost permanently and will be completely free of leakage. Applicable to 0.35 mm to 0.8 mmOD capillary columns. This product is usable up to the maximum temperature of your columns—not to exceed 350 °C. Main usage: Connection of broken capillary columns The connectors are unobtrusive. On-column sample injection Any capillary columns can be used in on-column injection mode by connecting a short wide-bore capillary columns to the inlet of the column Retention gap method An about 2 meters long capillary tube with no stationary phase, which is connected to the head of analytical capillary column, prevents peaks from being split Column conditioning A short capillary tube, which is connected to the outlet of the column, prevents air (oxygen) from diffusing into the column, thus preventing the deterioration of liquid phase which is kept at a high temperature Stable storing of capillary columns Deterioration by air and contamination can be prevented by connecting the both ends with a capillary tube.
-
-
Product Part
-
-
-
Product PartDescription:
Split only, ID 3.5mm, OD 5mm, Length 95mm